Travertine Filled Honed 40,6x61x1,2 cm

1000 m2 Ready to import from Denizli Turkey

Travertine Filled Honed is a beautifully coloured and elegant selected travertine with soft creamy swirls. Beautiful for formal or informal living, equally at home in dry and wet areas and very tactile. Travertine filled honed is a dense stone with a naturally pitted surface nature that may be filled or left open for a more rustic appearance.The material comes from the Denizli Turkey and has been used for centuries for floors, walls and many buildings. The structure is extremely dense and hard wearing and can also be used for kitchen bench tops and bathrooms.

Travertine Filled and Honed 40,6,x61x1,2 cm from Turkey is a high variation of beige,cream, wallnut, noche travertine that adds warmth and depth to any interior project like bathrooms, kitchens and foyers as well as outdoor projects like pool patios and house gardens. This durable travertine mix tumbled french pattern set tiles are available in a wide variety of tile sizes, slabs and mosaic patterns for the highest coordination possible in design projects.

Travertine Filled Honed is a beautifully coloured and elegant selected travertine with soft creamy swirls. Beautiful for formal or informal living, equally at home in dry and wet areas and very tactile. Travertine is a dense stone with a naturally pitted surface nature that may be filled or left open for a more rustic appearance.The material comes from the Denizli Turkey and has been used for centuries for floors, walls and many buildings. The structure is extremely dense and hard wearing and can also be used for kitchen bench tops and bathrooms.

Mazzmar Stone’s capacity of supply for this material is 15.000 m2 per month.We are currently exporting Travertine Filled Honed tiles from Turkey to USA, France,Germany, Belgium, Australia and Romania regularly.

Travertine Filled Honed is a beautifully coloured and elegant selected travertine with soft creamy swirls. Beautiful for formal or informal living, equally at home in dry and wet areas and very tactile. Travertine is a dense stone with a naturally pitted surface nature that may be filled or left open for a more rustic appearance.The material comes from the Denizli Turkey and has been used for centuries for floors, walls and many buildings. The structure is extremely dense and hard wearing and can also be used for kitchen bench tops and bathrooms.

Mazzmar Stone’s capacity of supply for this material is 15.000 m2 per month Classic Mix Travertine. We are currently exporting Travertine Filled Honed from Denizli, Turkey to USA, France,Germany, Belgium, Australia,Bulgaria, Canada and Romania regularly.

The color of travertine, which falls into the warm neutral range, is influenced by the amount of iron and other organic impurities found within the earth’s crust where particular slabs are mined. On the lighter side, travertine showcases ivory and beige though it can be more golden or even dark brown.

Fillings

The pits are part of travertine’s inherent beauty, but you may prefer a smoother finish, which does not welcome and trap dirt and crumbs. To eliminate these natural pits, manufacturers fill them. The filler varies by fabricator but is most often either epoxy, a dust and resin mix or colored cement.

Some homeowners or installers choose to fill in tumbled travertine tiles on the job site. If the tiles have not been sealed beforehand, many of the crevices can be filled with grout. However, if the grout is rinsed too soon, some of the fillings may be washed away. Grout filling is also more prone to chipping. A better alternative is to apply a clear epoxy. When pouring epoxy, keep the area as clean and dust-free as possible while the resin dries, or the settling particles will mar the finish.

Honing

Honing is part of the fabrication process after the travertine has left the quarry. To create a smooth, warm finish, the travertine goes through a process akin to sanding wood that removes any ridges or bumps in the stone’s surface and results in a matte or dull sheen. The grinding process begins with coarse polishing pads. As the surface becomes more level, finer polishing pads are used.

While the honing process will eliminate the more shallow, surface-level crevices, it would not automatically fill in every natural pit in the travertine. In most cases, a honed stone has been filled to eliminate any crevices or cracks, but not always.